Love on the Battlefield

The setting of the National Cemetery at the Vicksburg National Military Park is one of the most peaceful ones imaginable.  The rolling loess hillside, graves in neat rows, each section terraced to provide a continuity among the gathered dead.  Oak trees, expanded to their full canopied width.  Magnificent magnolia trees, filled with heady blossoms.  Ancient crape myrtles and ginkgoes filling in the space.

And one very large downed tree, two terraces distant from the road.

Captain Dan Harder, a friend of mine from my time in Puerto Rico, texted me just before Memorial Day.  "Was at the national cemetery this morning putting flags out; apparently they have a giant tree that fell during the storm they can't remove because it's full of honeybees."

I had a quick conversation with the Superintendent of the park, and confirmed that they were interested in having my help.

Turns out that the giant tree was really a bigger job than I was able to do solo.  Everything I have worked to date has been able to be cut through with a reciprocating saw.  This sucker was far bigger than that.  Fortunately, Aaron Matthews, a friend of mine from work, is looking to get into bees, and offered his chainsaw prowess to the task.

Chainsaw work on the fallen tree stopped where the bees began.

Recon visit didn't tell me much, other than the size of the tree and the size of the entrance.  This is where it gets interesting.  If the bees are only in the very front of the entrance, and fill a space a little bigger than a breadbox, then I don't need to have a chainsaw.  But if it extends back further, I will need the help.

I veiled and reached in to pull out some of the debris in the entrance.

The bees, not unexpectedly, were more attached to their debris than I had anticipated.  Several expressed their displeasure in a very firm manner.

Signs of aggression, check.


Who could blame them?  The opening that they had was a knothole 20' up in a tree.  Now it is basketball- sized hole at a level that any passer-by could reach in easily.  That kind of situation would put any of us on edge.

I returned a week later to try again.  By now, the numbers had increased, and they had covered over some of the external comb with propolis, and they were even more ready to take swift action than before.

Bees covering the full entrance to the hive.

The wood has started to deteriorate, and is soft and crumbly.  They won't be able to stay here much longer anyway.  And as soon as the National Park Service can get the honeybees out, they can take away the tree and dispose of it, and straighten up the graves that were knocked around when the tree fell.

The interior of the log is covered with bees on every surface, and I did not have a way to figure out how deep it goes. 

Only one way to find out.  Reach the hand in and start cutting comb out.  And keep reaching in until there is no comb left.  The hope, of course, is that I don't run out of reach before I run out of comb. As soon as I have cut comb as far as I can reach, we have to move to using the chainsaw.

If the bees do not like people messing with the debris at the entrance to the hive, they REALLY don't appreciate solid chainsaw work.

The all-important selfie.  Obligatory.

One more visit yielded only a little more information.  The bees definitely extended further than I had originally thought.

Saturday started off cool and overcast, which meant the bees slept in, waiting for things to warm up before heading out to forage.  At 9 am, Aaron and I arrived, chainsaw and shop vac in tow. With a borrowed generator from the Military park folk (thanks for coming out, Auston!) we got started.

The initial foray into the hive was daunting. I have been chased by bees before, and I have had an entire hive mad at me before, but this was impressive.  The bees just boiled out of the hive, and enveloped both of us in a cloud of bees that overwhelmed us from the first cut of the comb.

I guess it makes sense.  The bees had been safely ensconced in a tree, safe from the elements and from predators.  I imagine that they lived a peaceful life, with no particular aggression needed to keep them safe.

Then suddenly, as Auston put it, God got mad at 'am, and suddenly they are living in a log that turned their hive 90 degrees on edge, and opened both entrances to the elements.  And to predators.

Auston told us, "Since they can't get mad at God, so they get mad at you."

And get mad, they did.

I looked down and did a quick count.  60 stingers in the back of my glove. Where I leaned forward to reach into the hive, the bees stung my cheeks through the veil.  Four times.  Another half dozen stings hit my hands through my double-thick leather gloves as I reached in.

For an hour, I cut away at inaccessible comb while Aaron helped keep the smoker fueled and fired up to help calm the horde.

Before the log fell, the bees had drawn comb vertically in the hollow of the trunk.  When it fell, that comb is now horizontal - not the bees' preferred position. So they sucked the nectar out, abandoned the use of those parts of the comb, and began drawing comb from the top of the log, and connecting it to the now unused comb stacked at the bottom.

Cross combing

Even so, they maintained the spacing that they needed to do basic housekeeping. So everything is stable, but also built at cross angles to everything else.  Cross angles make it impossible to remove comb cleanly.

And the bees that are now defending the wide open entrance are VERY defensive.

After the first cuts were completed, we pulled enough brood comb to start the bees in their new digs.  Once the box was filled up, we transferred all the comb to Aaron's new bee yard, and ran the vacuum for the first (of three) times, collecting some 15,000 bees in the process.  All of whom got transferred to their new hive.

Very quickly, I ran out of space to work, and Aaron started up the chainsaw.  The top entrance of the hive was quickly liberated, and the entrance in the base of the log widened, so that I could get at more of the comb.

Video taken with a potato....

Twice more, we smoked the bees to the entrance, and twice more, we removed the bees with the vacuum, transferring them to the new hive.

Final step was to feed the honey back to the bees, so they could use it to build the comb in their new box.

I used my newly-acquired Square (TM), and received the agreed-upon funds from the National Park Service. (#SquareOne, #contest).  The transaction was very smooth, and completed the full project perfectly. 

Bees defending high ground

In the final analysis, this was the most aggressive hive I have dealt with.  Possibly also the most bees.  Normally, once I get the entire area open, the bees will settle down and I can work more comfortably, in long shirt and pants with a veil.  These guys would have none of that.  I wore full gear the entire time.... only working without gloves towards the end.  Even then, the bees were feisty.

But I hope that gives them a fighting chance, as well.  We salvaged as much of the cross-combed brood as we could, with which they can raise more bees.  But even so, it might not be enough.    I'll be talking to some friends about installing a queen (we never spotted her) to help the hive establish.  But we'll give the 40,000 relocated bees a few days to build comb and make the hive their home.

And when we do, I'll update you all on the progress.


UPDATE:
"There are 3 bees left."

That was the message I got last night, four days after we removed the hive.  The bees absconded. A large number of them apparently died, within a couple of days of removal, and the bodies piled up.  And the remaining bees took off, leaving an empty hive.

I am going to get a handle on the relocation piece of this business one of these days.   It still seems like such a hit-or miss strategy I employ.  And sometimes it works.  Other times, not.  I usually come up with an after-the-fact explanation (too cold, too slow to move them, too long in the heat, induced robbing).  But the truth is, I am not always sure I know.  It is guesswork.

I need to guess better.

Pretender to the Throne

She has no claim on this throne, but she went in, nevertheless.

2 queens, 2 cages, 3 nurse bees to help out. 
$37.50 each.

Last Saturday, I bought a nucleus hive and two queens from my mentor.  (A recent flood had taken out a bunch of his 'nucs', and he only had one that he could sell me.)  But I had two different hives at the house that needed to be re-queened.  One had lost the queen because of an accident.  The remaining workers had hustled to raise up a queen, but with no success. Another was of a removal where the queen had not transferred.  I had tried to help both of the hives by sharing some brood from my successful hives, and had managed to keep the numbers high, but they had not had a queen successor to take over.

"Talk me through the process."  I asked my mentor for help.  Books are fine for background, but my bees don't read the same books, so I like being able to ask specific questions of people who do this professionally.

"First, go through the hive and make sure that you don't have any queen cells.  Then, spread your fingers like this (looks like a deck of cards between each of his fingers), and use that space between the frames to put this box in.  The workers will eat their way out, and the other workers will eat their way in.

"If, after four days, they haven't released her, pop it open and let her out manually."

Simple enough.  I had inspected the hives just the previous day, and there was no queen cell present.  It had surprised me a little - I had hoped that I would be able to avoid the $40 expense of buying a queen (each...).  But such is life.

I did as he said, and then left the hives for a couple of days.  The nuc I installed into a freshly painted hive, and left them running their lives on their own.  And this afternoon, I went out to release any queen that needed a little nudge.

First hive, opened up with a slight puff of smoke, and looked down into the hive.  The queen cage was still intact.  I pulled the tape off the edge, and pulled the plug - still filled with bee candy - and watched as the queen marched out and disappeared down the side of the hive.

Sweet success.

Emboldened by the ease by which I had just watched that happen, I opened the other hive, and peered inside.

Same story. The workers had not eaten through the tape and candy to release the beautiful queen.  So I repeated the process, cleared the dead bee from the entrance to the box (just like the first one) and watched as the fat-bottomed girl walked over the edge and disappeared.

Sweet success, part two.

I grabbed one of the other frames - one that she had NOT just walked down the face of, and glanced at it to see how much honey they had put on the frames.

Brood.

Wait.  Brood only happens if you have a laying queen.  There can't be brood in this one, because I don't have a...

OH, CRAP.

A gorgeous, fat, bright, yellow queen strolled across a frame of perfect brood.  I watched in horror as she walked to the edge of the frame and disappeared over the edge. I had just released a second queen into a perfectly functioning hive.  They HAD replaced the queen that had been lost.  And I had just spent 40 dollars needlessly.  Worse, I couldn't even go back and find the pretender.  Or the fat girl I had just seen.  They completely disappeared.

To clarify for those who don't know: one hive, one queen.  Honestly, I would have expected more resistance to the entry of the second queen.  But the other workers simply ignored her. So I don't know what happens next - whether there is a battle to the death, followed by a Quickening, or whether the newly introduced queen just gets ignored and starves.

But I can't worry about it too much. I have another removal tomorrow (for which I wish I had saved the queen) and another the following week.  I have to get ready.  And next time, when I am told to inspect to make sure there are no queen cells...

...you better believe I am going to do it, and that I am going to be thorough.  

The Beverly Carol - a B&B&B

It seems as though working at heights is my go-to job now.  Once again, I had a bee removal effort in Vicksburg, where the elevation of the job just gave me pause.

The entrance to this hive at the Beverly Carol - a historic home in the downtown area of Vicksburg,  was high on the exterior wall - right at the corner of the building.  Below the entrance was a three-and-a-half story drop.

The bees are somewhere near the top.  I can't even look.

It was not the sort of job I was looking forward to.

Immediately, I looked for alternative solutions.  After a little while of trying to figure out my options of ladders and scaffolding, I asked the owner if I could see inside.

The location interior to the hive is a laundry room, and one that is a later addition to the lovely 1910 house, now turned into a B&B.  Well, maybe a B&B&B....

It appears that a second-story balcony was enclosed, siding put on the outside, and tongue-and-groove flooring used as paneling for the walls.  Pretty solid.

But the proximity to the hive meant that it would be a perfect way to get at the hive without facing a three-story drop.  I provided Mrs. Jenkins with my estimate - the lowest amount that I charge for removals - based on the expected effort to remove a small infestation in a small corner of the building from the inside.

Easy peasy.

How hard can it be?

I know better than to ever say those words out loud.  Nothing is EVER easy peasy when it comes to bees.  And speaking the words means that the task is immediately more difficult than you can manage.

So I sealed the room with plastic sheeting - to keep the bees from going out the door and into the house - and got started.

Getting started is often the hardest for me.  I'm not sure what it is - might just be the spankings I got as a kid - but I just don't want to damage anything.

After finally breaking loose the corner molding, I was able to open the hive.  Just the corner.  And some excited bees made their way into the room.  Curious - not angry, but intent on evaluating the threat.


The tongue-in-groove paneling was locked into place in the corner, and resisted easy removal.  So over the next half hour, I struggled to remove the wall to get at the comb.  The area was almost certain to be a small one - there was just not enough space in the corner to hold a hive of any real size.

I finally decided that removing the molding around the window would allow me more access, and I pried it loose. 

Opening the wall.

The hive was not relegated to just the corner.  It turned out that this was an enormous hive, extending for about eight feet to the right of the corner. The comb next to the entrance was mostly dry, having held honey that had already gotten sucked down during the winter.  But an opening down below allowed the bees to expand.  And expand.  And expand.

A sawzall quickly  came into play (by the way, bees HATE the sound of saws), and I cut down the wall at the edge of the exposed comb, and exposed additional an additional five feet.  The area covered by the bees was phenomenal.

There was dry comb on the left.  There was nectar on the margin. And then rows and rows of brood - baby bees just waiting to be born.  Comb extending down four and five feet below where it was connected to the wall.

Baby bees, including several
peanut-shaped queen cells. 
Baby queens, ready to emerge.

This extension created a huge problem for transportation.  If you had asked me 20-questions about the hive before I started, I would have had a hard time guessing whether it was bigger than a breadbox.  That was about the size I expected it to be.

Instead, what resulted was much bigger than what I had the ability to move.  I came with equipment to stage and transport bees in two boxes. Those two filled up before I got done with the first segment.  The rest was choosing what pieces to save and which to discard.  Eggs for boy bees?  Discard pile.  Honeycomb with nectar in it?  Crush and strain, and then feed the remnants back to the bees.  Eggs of girls (worker bees)?   If they are in good shape, save them.

I cut and parsed and discarded and set aside a LOT of comb.  Anything that I did not put back in the hive got melted down to make wax - I should have quite a lot of lip balm available pretty shortly.  Maybe some mustache wax, too....

I did get some video of the removal of the comb.  The hyperlapse function of my camera was a good way to capture it, since it took forever to complete the job.

It took the whole day.

And then the next.

Cleaning the sticky leftovers took quite a while.  But the bees were promptly installed in the home bee yard, and are now happily buzzing around in their new home.

The Beverly Carol dropped a B - they are no longer a B&B&B!

(Or maybe they dropped an E - from the Beeverly Carol).

Feeling Stabby

Some days, it is simply hard to focus.

Those are the days to avoid working with the bees.

Yesterday, the smoke wasn't coming out right - I was alternating between dragonfire and snuffed candlesmoke. I was pushing to get done before dark. I was rushing through steps and feeling awkward.  And I was dealing with a whole new crop of emerged workers, who had never been worked before, and they were cranky about the whole process.  I think the worker who stung me was as surprised as I was that she was angry with me.

I never quite got to that Zen moment where I am just breathing and working with my bees.

I completed all my steps. I dosed the ladies and brood with some powdered sugar to help with the mites.  I smashed dozens of hive beetles.  I marked down in my journal where the grubs were and where the honey was and where the new comb was being drawn.  I removed a couple of queen cups so that she wouldn't raise other queens and swarm off.  I found the queen, and she seems happy.

And after getting stung, I pulled on some gloves - I have been working without them -  so I wouldn't risk reacting to a sting and dropping the frame.  I even harvested a couple of teaspoons of honeycomb, to share with Kathe.

I did what I needed to.  But days like that, when I am a little off of my game, and the ladies are feeling stabby, it might be best to just put the work off for a little bit.




                                              Sting count: 1.  Cumulative sting count: 1.